How far away should your heat pump be located from your pool?
A heat pump can have two functions at the same time, one to heat the house and the other to heat the pool. The problem is to know the distance between the heat pump and the pool for safety. Other conditions are also required.
The perfect distance between the heat pump and the pool
Before installing a pool heat pump, it is important to know the distance that must exist between them. The perfect distance starts at 3 metres, but should not exceed 7 metres. This distance allows the equipment to function properly and to ensure safety around your pool.
However, this distance must be assessed, as the installation must meet other conditions.
Measuring the distance between the pool heat pump and other criteria
In principle, the heat pump should always be placed close to the pool, taking this into account, other parameters must also be respected.
Ventilated location
A swimming pool heat pump can be installed at a distance of around 3 to 7 metres, provided that the air can circulate freely in the chosen location. A poorly ventilated location or a confined room is therefore not suitable. This also applies to the technical room of the swimming pool, a cellar and other places that are not sufficiently ventilated.
The motor of a heat pump can overheat or even break down if there is insufficient ventilation, which will damage it.
A place that is too cluttered is not suitable for this equipment either. For good air circulation, its surroundings should be well spaced.
Other locations to avoid
Windows in the house that are close to the pool should be avoided. The installation of the heat pump must respect this distance because of the nuisance it can cause. This is to avoid damage to the pool and the fresh air it emits.
Places where people pass by should also be avoided
You should also avoid a location that is too close to the neighbourhood. Even if you choose quiet heat pumps, they can become noisy when damaged. The noise will subsequently cause disturbances.
After assessing the distance to the pool and finding the right location, the installation of the heat pump will take place.
How to install the pump successfully?
It is important to prepare the location of the heat pump before starting. A tamped ground or a concrete slab is perfect for installing the heat pump. It is necessary to isolate the device from the ground and to raise it with rubber underneath. This ensures that the unit is well protected and facilitates the flow of water.
However, you can call in a professional to help you easily find the best location and make the preparation.
As for the installation of the swimming pool heat pump, the water circuit must be connected as well as the power circuit, installation of the circuit breaker and the cables.
